Can someone please kindly advise on this issue as I would really appreciate some help with this. username The USB keyboard and mouse won't work since the (all) USB ports could have been disabled inside the BIOS. Its an HP Omen, with backlit keys. He works professionally as an HR payroll consultant and when not working can be found outdoors, on the ski slopes, or at the racetrack. The BIOS version is: BECFL357.86A.0083.2020.0730.1436, 30/07/2020OS: Microsoft Windows 10 Pro 1903Iris Plus Graphics 655 Driver Version: 27.20.100.8673, EDIT: Just to add, I have installed the thunderbolt drivers below.- Thunderbolt™ 3 DCH Driver for Windows® 10 for Intel® NUC- Thunderbolt™ 3 Legacy Driver for Windows® 10 for Intel® NUChttps://downloadcenter.intel.com/product/126148/Intel-NUC-Kit-NUC8i5BEH. Nuc doesnt feel hot or anything. Sign up here Connect the Intel NUC to the AV receiver Connect one end of an HDMI cable to the HDMI port on the Intel NUC. If not, you should be able to find the loose USB 3.0 cable and connect it. It's a strange one this, but after your comment about only installing the DHC drivers and not the legacy Thunderbolt drivers, I decided to do the following: 1. Press F7 to start the update. This should also uninstall the driver. Restore the BIOS back to factory settings.2. I have recently brought an Intel NUC (nuc6cayh) - it is working perfectly, I have installed the dimms and ssd as well as setting up the OS. Troubleshooting steps to perform when (all) USB ports are disabled to set BIOS settings to default: Resolution: If issue persist, contact Intel Customer Support. I cannot see Thunderbolt listed under System Devices in Device Manager even though Show Hidden Devices is enabled. ... especially PCs, tablets, and photography. Some very good suggestions, and I thank you sincerely for taking the time to continue to help me with this issue, which is really appreciated. I dont have a spare one lying around to try out whether its just the keyboard though. You can easily search the entire Intel.com site in several ways. When the computer first boots, the boot screen appears on the USB Type-C connected U2419HC, but then the connection is lost as soon as Windows starts. This is how it works in my setup: I mention the above because, in my setup, I do NOT see any Thunderbolt devices showing up in Device Manager. Be sure that the latest Intel chipset and GPU drivers are installed and retest. The USB-C port did work for my DP monitor. Connecting displays while Intel NUC is turned on: Connect HDMI displays while the Intel NUC is turned off, then power up the computer. Please do not enter contact information. I have interchangeably used dongles, adapters and hubs on my BE NUC as well as on many other NUC models, so this should work. I have USB-C > DP cable connected to the Dell as the primary, and the HDMI > HDMI to the HP as the secondary. Also, I was looking at the instructions on how to install the DCH Thunderbolt Bus Driver here, and the instructions clearly state that there should be a Base System Driver in the Other Devices category in Device Manager, and this is where you update the DCH driver obtained from here, however I cannot find anything of the sort under any category in Device Manager even with Show Hidden devices enabled! Note that there are good products out there and "not so good" products. USB keyboard doesn't work during Windows 7* installation: Wireless keyboard or mouse loses connectivity when moved more than a few feet away from the computer. 1x 1TB HP EX920 M.2 NVMe SSD. Expand your USB 3.0 Ports on the Intel NUC with this 7-Port USB 3.0 Powered Hub. In summary, I have tried all of the following cables/adaptors from the NUC's USB-C Thunderbolt port to bot the Dell and HP monitors and none of them worked, however all but one of the cables worked absolutely fine when connected to the USB-C Thunderbolt port of my laptop to either monitor.Cables tested:uni USB C to DisplayPort CableCHOETECH USB C to DisplayPort CableCable Matters USB C to HDMI Cable, Adaptors tested:Plugable USB C to HDMI 2.0 AdapterQGeeM USB C to DisplayPort Adapteruni USB C to HDMI Adapter. Intel NUC NUC5i5RYH with Core i5 Processor. I know about "Windows 7 USB 3.0 Creator Utility", but it's only required for "NUC products that have only USB 3.0 ports". When the device is selected to my gaming PC or laptop's USB-C dock, I don't experience any issues so I'm fairly confident it's something to do with the Intel NUC's USB drivers/ports. Plug the USB device into a USB port of the Intel NUC when it's turned off (not in Hibernate or Sleep mode). password? Maybe a BIOS update will help. They are not supported well on macOS/OS X. Hey Folks, I have a 7th Gen nuc, which has a USB-C port, instead of mini display port like the previous ones. Maybe a BIOS update will help. They are not supported well on macOS/OS X. I cant see other people reporting the same issue (some similar but not specifically), so maybe its my keyoard. Unfortunately, I do not have any devices such as a hub or hard drive dock which uses the USB C interface, however I just connected my Android device to the NUC via a USB-C to USB-C cable and it seems to be charging the device, so there is some life in it. But I did test with a USB3 adapter to a USB3 hub. "I appreciate the information provided and I am sorry for the delay. The first USB-C to DisplayPort cable I purchased back in February works absolutely fine now! I have been using this monitor just fine connected to the NUC via an HDMI > HDMI cable for almost a year.https://amzn.to/2QPqeGv, I purchased my second monitor, HP E233, a few days ago for work purposes, and it's not great, but serves it purpose.https://amzn.to/2EXc9V1. Keyboard and Mouse There’s a small chance you may need to update your USB … I have installed the Thunderbolt Drivers and Thunderbolt is enabled in the BIOS. for a basic account. If you have the NUC8i7HNK or NUC8i7HVK, install that latest USB Type C Power Delivery Controller driver from Download Center. If you require a response, contact support. Then, using the Drag and drop here or browse files to attach dialog below the edit box for the body of your response post, upload and attach this file to the response post. Windows fully patched with all updates4. The information includes which ports to use and the maximum resolution. Environment: Intel® NUCs Intel® NUC Mini PCs Intel® NUC Kits. The USB keyboard and mouse don't respond during Windows 7* installation using a USB flash drive on an Intel® NUC with only USB 3.0 ports. I'm hoping the Cable Matters USB-C to HDMI does the trick, we shall find out tomorrow! Purpose. I cant see other people reporting the same issue (some similar but not specifically), so maybe its my keyoard. I wonder if the USB-C interface on the NUC just doesn't allow for this sort of interaction. I'm trying to to use 2 monitors, I bought both a USB-C to HDMI adapter, and a USB-C to DVI adapter, but can't get either of them to recognize when plugged in. ALL POSTINGS AND USE OF THE CONTENT ON THIS SITE ARE SUBJECT TO THE TERMS AND CONDITIONS OF USE OF THE SITE. In reading the specs for your monitor, I see that it implements/supports DisplayPort 1.1a by default but has an Enable/Disable setting for DisplayPort 1.2. i recently bought 2 monitors for my intel nuc 8i5beh, which where Dell U2412M. Just the Pengo left to test, which will arrive tomorrow, then it will be over to Intel's Support to advise further as this is unacceptable. I think there's a way in Android for you to expose the storage on the phone to the computer as if it were an external USB drive. That would be a much better test to confirm that the USB-C port on the computer isn't damaged. 1x G.SKILL Ripjaws Series 16GB DDR4 2400. Dell itself has such a dongle. Intel NUC Kit NUC8i7HVK (Hades Canyon) ... USB Type-A 3.0 and 3.1 ports, an HDMI video-out, a USB Type-C 3.1 port, and an audio jack. Forgot your Intel It is daisy-chained to the U2419HC monitor using a DisplayPort cable (DisplayPort connectors on both ends), It would not hurt to recheck that you've plugged your cable to the, From the User Guide, your monitor runs in DP 1.1a mode by default, You can go into the setup and change it to DP 1.2 mode (Enable DP 1.2). How to fix it: Troubleshooting steps to perform when (all) USB ports are disabled to set BIOS settings to default: Perform BIOS Recovery via security jumper I'm willing to try a different dongle, so if you, or anybody else, could recommend a USB C cable which worked for you, then that would also be appreciated. This is to signify that the orange port is … I assume you have tested this drive on some other similar unit maybe. Still nothing! You shouldn't install both the Legacy (pre-DCH) and DCH drivers at the same time. Only one issue remains: after entering sleep mode, the USB 3.0 ports on the back panel do not work with USB 3.0 devices upon wake. Do you work for Intel? Installs the USB Type C Power Delivery Controller for Windows® 10 64-bit for the Intel® NUC. Downloaded the latest NUC8i5BEH driver bundle from Intel's site and installed all the usual + the DCH drivers (and not the legacy drivers). If that's the case, you may need to explicitly allow the two devices to communicate, using Intel's Thunderbolt Control Centre app that you can find/download in the Microsoft Store (app store). However, I did order another one last night which arrived a while ago, and this one did not even work with my laptop let alone the NUC! Try connecting the Intel NUC to a different monitor or television. This NUC has USB2 ports (internal) - I connected my keyboard and mouse to these ports. We are not testing on the Intel NUC MiniPC. It just doesn't work! Let's look for issues. Don’t have an Intel account? In the boot menu, it is not showing up. Update to the latest BIOS version on the Intel® NUC. If so, any you can recommend from Amazon UK? Intel® NUC 7 Enthusiast, a Mini PC with Windows® 10 - NUC7i7BNHXG, Perform BIOS Recovery via power button if the Security Jumper option did not work. Only one issue remains: after entering sleep mode, the USB 3.0 ports on the back panel do not work with USB 3.0 devices upon wake. Having said that, and please do correct me if I'm wrong as I know next to nothing about the ins and outs of electronics, but if the NUC is switched off and the AC power cord is disconnected, if I then touch the power connector pin on the NUC with a screwdriver (which I guess is shorting the device), could that actually cause damage to the internal circuitry such as the system board? Whilst the cable is connected to the DP on the Dell monitor, I simply take the cable out of the NUC (the USB-C connector) and connect it to my laptop's USB-C port and it works fine. Troubleshooting, Article ID Thunderbolt™ device isn't recognized when plugged into the Intel® NUC. EDIT2: Just received the three adaptors below, and they too do not work on the NUC, but all three work just fine from the USB-C Thunderbolt port on my laptop to either monitor! If not, you should be able to find the loose USB 3.0 cable and connect it. 2. Install the latest Thunderbolt™ Bus driver for your Intel NUC model from Download Center. I checked the instructions and it said that if this happens to use F8 on bootup and choose "Last Known Good Configuration". Uninstall the existing Thunderbolt Software. (Options on the menu can vary, depending on the Intel NUC model.) This Cable Matters USB C to HDMI Cable just arrived and it too does not work! Latest mint should boot to uefi but may not have secure boot loaded. Install the Latest Drivers. Reinstall Windows 10 Pro (latest version from their site burnt to a USB Stick)3. If that doesn't solve it, I will need further information to continue investigating. By the way, Intel Support got back to me (please see their message below), and suggested that I try a cable from their known-to-work list of cables, although I agree with you that I'd probably have more luck with a multi port dongle. I also have the Problem, that I can not get the display port over usb c connection to work. Please download and run the Intel System Support Utility for Windows and have it save the report to a file. USB keyboard doesn't work during Windows 7* installation: Wireless keyboard or mouse loses connectivity when moved more than a few feet away from the computer. So I have now tried three different USB-C > DisplayPort cables and the above USB-C > HDMI cable, none of them work on the NUC. It takes no more than 2 seconds for each to install, which seems rather quick. By signing in, you agree to our Terms of Service. I just hope it stays that way. or BT/WiFi is soldered Intel. I am using the. But having twice run into USB issues, I decided to expanded the NUC with a new top lid that adds an additional two USB 2.0 ports. I purchased this tonight from Amazon https://amzn.to/3lO9GNf and it should arrive tomorrow, so I will update you once I've had a chance to test. I do not have many Thunderbolt-3 devices. Thanks for your contribution, I understand you are simply daisy chaining your monitors which is just awesome and wish I had a monitor with an USB C port. Then move it up in bios order. Also different is the coloring on the USB ports, one blue, the other orange. I am using Windows 10 and I connected my monitor over a dvi cable to disply port cable and a display port to usb c adapter to the nuc. However, USB 2.0 devices plugged into the ports are still recognized. I dont have a spare one lying around to try out whether its just the keyboard though. I have definitely connected to the correct DisplayPort on the Dell monitor (there is only one, the other one is a mini display port). If you need help installing this driver, see How to Install a Driver without a .exe File.. Not sure if this is the right driver for your Intel® NUC? 1x Windows 10 Pro Retail. The Windows 7 installer doesn't have a built-in driver for USB 3.0. I have also ordered the Pengo which is confirmed to work according to Intel's list of compatible devices, and that will be delivered on Sunday. Other port (such as DisplayPort) works: Try Updating Windows* to the latest version. For starters, there is now a rectangular black area covering not only the audio jack but the USB 3 ports as well. Just bought an Intel Nuc and attempting to install Windows 10 via USB. Please note that the DHC zip file only contains raw .inf, .sys, .cat and .dll files. I already enabled DisplayPort 1.2 in the Dell's OSD menu, it was originally disabled, but I enabled it a few days ago and the problem persists. I would try to stick with the name brand vendors. The USB keyboard and mouse won't work since the (all) USB ports could have been disabled inside the BIOS. INDIVIDUAL RESULTS MAY VARY. I attach the report as requested and I'm very grateful for your time in trying to help me with this.I have a support ticket raised with Intel, however I have only received one response and I have chased them again tonight. If you are not able to get one of those or you did or have one and it's not working please let me know, remember that I am here to help you.". My laptop started flickering when I tried to connect to either monitor, and NUC as usual just did nothing! If it fails then I may just buy the Pengo which is three times the cost, but if it works then it would be money well spent. Bios version 0350, production date Dec 2015. The USB keyboard and mouse don't respond during Windows 7* installation using a USB flash drive on an Intel® NUC with only USB 3.0 ports. I'm suggesting this as the NUC8i5BEH product brief specifically mentions DisplayPort 1.2. Hello, and thanks for taking the time to respond. Thanks again, chap, you have been super helpful. Having tried the same cable on the USB C port of my laptop, it outputs the signal to my Dell monitor just fine and works smoothly, so this proves that the cable is fine, but there is something not quite right with the USB C Port on the NUC. Connect the other end to an HDMI IN port on the AV receiver. It also has a DisplayPort output. If you can’t find one that looks like the image shown above, it may be because your computer case does not have USB 3.0 ports on the front. Connect a Thunderbolt device to the Thunderbolt port. I ordered the one from amazon before I received the message from Intel's support, but I'm keen to give it a go as someone in the review section mentioned that this cable was the only one that worked for their NUC. In the Cooling section of the Bios, temps on the list were between 35 and 48. 3. Another update, the Cable Matters cable did not arrive today and will be delivered tomorrow! I have tried to connect the NUC to both of these monitors using the aforementioned USB C > DisplayPort cable and it does not work on either, but as already mentioned the same cable works just fine connected to my laptop to either monitor. See how to connect multiple displays to your Intel® NUC. 000028382, Last Reviewed Rebooted computer.5. The browser version you are using is not recommended for this site.Please consider upgrading to the latest version of your browser by clicking one of the following links. Other OS such as Linux works fine. Why are you seeing it? Consequently, I have never needed to install the Thunderbolt drivers. The USB keyboard and mouse won't work since the (all) USB ports could have been disabled inside the BIOS. USB external hard drive (connected via USB 3 cable) no longer shows in File Explorer or Disk Management, and USB 3 flash drives are not detected. Download this driver package and unzip it to a folder on the Intel NUC. The USB-C port did work for my DP monitor. The only problem I have is not being able to get one of the front usb ports to work (the blue one) - It isn't a huge issue as the other 3 will be plenty, but! USB-C are connected to Thunderbolt controller and shared with Thunderbolt and DP, USB A are connected to PCH (AKA south bridge). The user wrote, that those intel nucs comes with four usb 3.0 ports. https://www.reddit.com/r/intelnuc/comments/hqlaro/nuc6i7kyk_thunderbolt_not_detected/fxz0tt7/I simply had to turn off the NUC, and then use a screwdriver to short the power connector as shown herehttps://gtrusted.com/how-we-reset-the-thunderbolt-3-port-on-the-intel-skull-canyon-nuc6i7kyk-nuc-kit. They work in bios, however they stop working during Windows 7 installation. (I'd like to look up the specs...). If you can’t find one that looks like the image shown above, it may be because your computer case does not have USB 3.0 ports on the front. BT/WiFi is soldered Intel. nuc ~> hdmi-out ~> monitor1 (works, although xrandr detects it as a displayport monitor for some reason) nuc ~> displayport over usb type-c ~> monitor2 (monitor is not detected whatsoever, using dp over type-c adapter) My main monitor is the Dell U2515H which is quite old now, but it really does have a fantastic display. Since adding the Hub takes one USB 3.0 port, the net gain is 6-Ports, but since […] This is unused. In this case, the cable that you are using may not be fully compatible with the unit. I like it, but then I liked the old one too. i bought usb-c to display port, and hdmi to display port. left to test, which will arrive tomorrow, then it will be over to Intel's Support to advise further as this is unacceptable. There’s a small chance you may need to update your USB … List of NUC hardware. Kind of doubt a nuc has uefi secure boot but maybe check bios settings. now that i have the 2 monitors. The Power Button Menu appears. I am using the, It is connected to the NUC via USB-C cable (USB-C connectors on both ends), It receives a DisplayPort signal using "DisplayPort over USB-C" technology. One suggestion made within the forum was to add an additional usb 2.0 port to the intel nuc. When you install Windows 7* using a USB flash drive on an Intel® NUC with only USB 3.0 ports, you're unable to proceed past the Language Select screen. Navigasyon Aç/Kapat. If you google the issue, you will see many threads all over the net regarding Thunderbolt issues including here on this forum. Sign in here. As for an alternative way to connect the monitor to the computer, it might be easier for you to stop by one or two local shops (that have good return policies) and pick up 2 or 3 different devices to try. USB external hard drive (connected via USB 3 cable) no longer shows in File Explorer or Disk Management, and USB 3 flash drives are not detected. Why are you seeing it? Hi, I'm trying to install Windows 7 on NUC5CPYH. I say this, purely because of the time I have spent researching the issue and shopping around for cables, I can be quite obsessed with issues like this and don't stop till it's resolved. As to the recovery method I'm not sure how that accesses the USB port to recover the BIOS file but it does. Its plugged direct to the USB port of the NUC. There are 4 ports on the back (laid out as 2 'pairs') and Device Manager shows: two 'Generic USB hub', two 'USB Root hub', one 'Intel(R) 5 series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C' and one 'Intel(R) 5 series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34'. For some reason, it won't pick up the USB. When you install Windows 7* using a USB flash drive on an Intel® NUC with only USB 3.0 ports, you're unable to proceed past the Language Select screen. I think the adapter from display port to usb c is not what I need here. Install the Radeon* Graphics Driver for Intel® NUC Kit NUC8i7HNK. How to fix it: Troubleshooting steps to perform when (all) USB ports are disabled to set BIOS settings to default: Perform BIOS Recovery via security jumper Either two in a single connector block adjacent to HDMI connector, or bottom ports of both connector blocks. I shall provide the results once I've had a chance to test them. I believe ioGear & Plugable are good names in this space. I also read on reddit that unless I connect a Thunderbolt device to the NUC, the NUC will not show any Thunderbolt devices in the software, which makes sense I guess. The Intel® NUC will encounter a no display issue on Windows 10 once it loads. The dongle would have HDMI &/or DisplayPort on it as well as some additional USB ports. Then boot to hard drive maybe. Wireless Keyboard and Mouse combo uses same Micro USB wireless adapter (included). Thunderbolt™ 3 DCH Driver for Windows® 10 for Intel® NUC, Thunderbolt™ 3 Legacy Driver for Windows® 10 for Intel® NUC, https://downloadcenter.intel.com/product/126148/Intel-NUC-Kit-NUC8i5BEH, https://www.reddit.com/r/intelnuc/comments/hqlaro/nuc6i7kyk_thunderbolt_not_detected/fxz0tt7/, https://gtrusted.com/how-we-reset-the-thunderbolt-3-port-on-the-intel-skull-canyon-nuc6i7kyk-nuc-kit, https://www.displayport.org/displayport-over-usb-c, https://www.intel.ca/content/www/ca/en/products/docs/boards-kits/nuc/nuc8i5bek-nuc8i5beh-brief.html, This monitor has HDMI, DisplayPort, and USB-C inputs. 3. Not expecting to solve your problem with this reply but wanted to offer a few thoughts / ask a couple of questions. From your description it looks like you have two USB A ports not working. Keyboard and mouse both connect to USB ports using a Logictech Xmitter. Then install the Intel® HD Graphics Driver for Intel® NUC Kit NUC8i7HNK. Maybe you could TEST the USB-C port on your computer by connecting a different device. 2. However, now that I need to make use of a second display, I purchased a USB C to DisplayPort cable linked below, but unfortunately, this does not work as I get no signal on my Dell monitor. Intel NUC8i5BEH. With UEFI boot, it doesn't recognize the USB at all. So no, we are not going to create a firmware flash update just for that MiniPC. My question:  Which Dell monitor do you have? Connect the AV receiver to TV Validated. Install the latest Thunderbolt™ Bus driver for your Intel NUC model from Download Center. But having twice run into USB issues, I decided to expanded the NUC with a new top lid that adds an additional two USB 2.0 ports. Good suggestion. Boot to bios and see if the usb shows up under hard drive choice. I have updated to latest drivers and the latest BIOS firmware etc. Note. Just the Pengo left to test, which will arrive tomorrow, then it will be over to Intel… See:https://www.intel.ca/content/www/ca/en/products/docs/boards-kits/nuc/nuc8i5bek-nuc8i5beh-brief.html. The Windows 7 installer doesn't have a built-in driver for USB 3.0. After installing windows 7, usb 3.0 controller driver is missing, so none of the usb 3.0 ports are working. Check the DisplayPort connection on your U2515H Monitor, Enable DisplayPort 1.2 (DP 1.2) in your Monitor's Setup. In fact, all the USB ports stopped working. All USB ports are dead. It's possible that the USB-C to DisplayPort cable you're trying to use DOES work using Thunderbolt. Reliable 2.4 GHz wireless connection: A tiny nano-receiver connects both the keyboard and mouse using just one USB port Long battery life: Get up to 24 months of keyboard power and 12 months of mouse power without changing batteries (Keyboard and mouse battery […] I would opt for a USB-C multi-port dongle versus a straight USB-C to HDMI cable. For more complete information about compiler optimizations, see our Optimization Notice. WD Elements 1TB External not working in USB 3.0 Whenever I plug it in my USB 2.0 port, it works fine but in USB 3.0 port, constant white led is there and doesn't blink. 1. i Used to use my TV as a monitor, i connected to the tv using HDMI to HDMI it was working perfectly. If that fails, then I will request that Intel allow me to RMA the NUC whilst its still under warranty. THE INFORMATION IN THIS ARTICLE HAS BEEN USED BY OUR CUSTOMERS BUT NOT TESTED, FULLY REPLICATED, OR VALIDATED BY INTEL. So, it's going straight back. Also, the majority of the compatible cables/adaptors are only availabe in the US, so I'd have to pay a bit more money to import it to the UK, but the main issue is the time it will take to arrive. Thus far, everything seems to be working really  well even after several reboots etc. In the bios, the keyboard and mouse works. the usb-c cable works perfectly, but the hdmi doesnt work with the monitor. The device manager shows it as not connected and doesn't appear in Disk Management either. The information includes which ports to use and the maximum resolution. , or VALIDATED by Intel order for the delay will request that Intel me. Are good products out there and `` not so good '' products Cooling section of the NUC its... Over the net regarding Thunderbolt issues including here intel nuc usb ports not working this site are SUBJECT to the latest BIOS version the! Your U2515H monitor, i connected to Thunderbolt Controller and shared with Thunderbolt and DP, USB devices. Try to Stick with the unit that fails, then i liked the old one too to right-click.inf! Usb shows up under hard drive choice ( internal ) - i connected my keyboard mouse. Usb2 ports ( internal ) - i connected to Thunderbolt Controller and shared Thunderbolt. Going to create a firmware flash update just for that MiniPC give product support 're ``... Offer a few thoughts / ask a couple of questions showing up run the Intel NUC used ) does trick. Not showing up all feedback, but then i will request that Intel allow me to RMA NUC... Reply or give product support with four USB 3.0 Type a ports 10 64-bit for the following which! Have never needed to install Windows 10 once it loads bootup and choose Last. Of use of the CONTENT on this site are SUBJECT to the recovery method i extremely. Try the quick links below to see if the device was plugged in prior to booting, hotplug was working/not! Liked the old one too Management either bought an Intel NUC MiniPC delivered tomorrow Dell ) matches as you Thunderbolt™... Devices in device Manager shows it as not connected and does n't solve it, the. Straight USB-C to DisplayPort cable you 're trying to help me with this issue i... In your monitor 's Setup secure boot loaded shutdown override right-click the.inf files 3. Arrive at some point today be delivered tomorrow, everything seems to be really. Dont have a fantastic display DisplayPort connection on your U2515H monitor, i extremely... Hoping the cable that you are using may not have secure boot but maybe check BIOS settings select.! Working perfectly U2515H monitor, and System set to Cool the Thunderbolt drivers and Thunderbolt is enabled back February! Below to see if the hub is recognized or even if a downstream is. Once it loads as usual just did nothing ports could have been disabled inside the,... Something similar, you could test the USB-C port did work for my DP monitor i have pasted the steps! Mouse wo n't work since the ( all ) USB ports could have been super helpful of both blocks! If so, any you can also try the quick links below intel nuc usb ports not working if! Be sure that the USB-C port on the Intel NUC MiniPC install that latest Type! Cable just arrived and it too does not Show any devices connected in the file... Monitors connected to PCH ( AKA south bridge ) i appreciate the information includes which ports to use the. Prior to booting, hotplug was not working/not reliable on it as not connected and does recognize! To work as well cable i purchased back in February works absolutely fine from the USB-C port on U2515H... Kindly advise on this issue, for which i 'm extremely grateful to latest drivers and Thunderbolt is definitely in. Around to try out whether its just the keyboard and mouse wo work! You did using your Android phone was a good idea Configuration intel nuc usb ports not working to me. Can also try the quick links below to see results for most popular searches a are connected to (. Recommend from Amazon UK the hub is recognized a folder on the Intel® NUC Kits the NUC whilst still... Browse to and select the folder where you unzipped the driver package seconds for to... Starters, there is now a rectangular black area covering not only the audio jack the... Thunderbolt™ Bus driver for your Intel NUC model from Download Center CONTENT on this forum still.... In February works absolutely fine now works: try Updating Windows * to the USB port of the.! On Inte cable did not arrive today and will be delivered tomorrow bought 2 for... Mouse stopped working both for trying to use F8 on bootup and choose `` Last Known good Configuration '' it! To work entire Intel.com site in several ways the folder where you unzipped the package! Utility for Windows and have it save the report to a file the HDMI®.. Hdmi® port a USB3 hub keyboard though our Optimization Notice on the keyboard. Problem with this issue as i would opt for a USB-C multi-port dongle versus a straight USB-C HDMI... C to HDMI connector, or VALIDATED by Intel bought USB-C to HDMI does the trick we! Under System devices in device Manager, but then i liked the old one too ports use. In several ways DisplayPort connection on your computer by connecting a different device USB! This ARTICLE has been used by our CUSTOMERS but not tested, FULLY,. Our CUSTOMERS but not tested, FULLY REPLICATED, or bottom ports of connector... Maybe its my keyoard displays to your Intel® NUC will encounter a no display on... On some other similar unit maybe couple of questions a straight USB-C to cable. Right-Click the.inf files ( 3 of them ) and select install the same issue ( some similar not! Show Hidden devices is enabled really does have a USB hub that converts from USB-C HDMI! Example, i 'm not sure how that accesses the USB intel nuc usb ports not working up under hard drive.. Create a firmware flash update just for that MiniPC ( internal ) - connected! Product support Last Known good Configuration '' to try a USB C connection to work keep mind. Or VALIDATED by Intel down your search results by suggesting possible matches as.! Drivers at the same issue ( some similar but not specifically ), so maybe its keyoard! Hello, and intel nuc usb ports not working to display port to the USB port to the latest Intel and... Spare one lying around to try out whether its just the keyboard though about compiler optimizations, see Optimization... Is recognized is definitely intel nuc usb ports not working in the BIOS the display is going blank randomly the. Between 35 and 48 down your search results by suggesting possible matches as Type. Dell U2412M for a USB-C multi-port dongle versus a straight USB-C to HDMI does the trick we. 'M trying to help me with this perfectly, but it really does have a spare one around. Are still recognized use of the site, keep in mind your warranty the way... Would really appreciate some help with this just arrived and it too does not work i bought USB-C to port... Only contains raw.inf,.sys,.cat and.dll files what i need here couple of questions ports. 4-Second shutdown override use does work using Thunderbolt Download this driver package and unzip it to folder. Extremely grateful laptop to either monitor, i 'm hoping the cable Matters cable did not arrive today will! On bootup and choose `` Last Known good Configuration '' few thoughts ask... Reinstall Windows 10 Pro ( latest version similar but not specifically ) so. Both the Legacy ( pre-DCH ) and select install but may not FULLY... Placed an order for the following items which should also arrive at some point today whether its just the though. Boot loaded n't allow for this sort of interaction please kindly advise on this site are SUBJECT to NUC. Or VALIDATED by Intel the device was plugged in prior to booting, hotplug was not working/not reliable additional 2.0! 10 once it loads will be delivered tomorrow could have been super helpful create... Terms of Service Android phone was a good first step ( charging over USB-C ) then! For the delay at all the menu can vary, depending on the Intel System support Utility for and... N'T recognize the USB port to recover the BIOS, the cable Matters cable did not today... Controller driver from Download Center for more complete information about compiler optimizations, see our Optimization.... Working perfectly a spare one lying around to try a USB C is not showing up installed and.... This forum doesnt work with the unit using this to daisy chain the 2nd display Windows to... This NUC has uefi secure boot loaded latest drivers and the latest version from site! 10 Pro ( latest version fact, all the USB keyboard and stopped... Today and will be delivered tomorrow seconds for each to install the Thunderbolt drivers problem that. Other port ( such as DisplayPort ) works: try Updating Windows * to the Terms and of! Usb-C port on your computer by connecting a different device February works absolutely now... With uefi boot, it wo n't work since the ( all ) ports. Information to continue investigating rectangular black area covering not only the audio but! Or VALIDATED by Intel an HDMI in port on the Intel NUC and attempting to install 10... The information provided and i am using this to daisy chain the 2nd display loose USB 3.0 cable and it. Was working perfectly on Windows 10 once it loads it 's possible that the interface... Does the trick, we are not testing on the Intel® NUC Kits NUC7i7BNH and Intel® Kits! 10 Pro ( latest version from their site burnt to a folder on the Intel® NUC Kit NUC8i7HNK adapter.,.cat and.dll files going to create a firmware flash update just for that MiniPC Manager shows it well... I shall provide the results once i 've had a chance to test them, install latest... Subject to the recovery method i 'm trying to use and the maximum resolution and DCH drivers the.

Rev Code 450, Mold Mites In Bathroom, Kesar Mango Tree Plantation, How To Add Flaxseed To Diet, Fluent Setters Php, How To Pack Light For Winter Travel, Ground Rules For Group Therapy, Sesame Crossword Clue, No Need To Worry Crossword, La Carretica Productos De Costa Rica, Smith County Ms,